GLS-150GL UP
Optical Profile Grinder
Next level up profile grinder.
New innovations in integrated process technology advances both workpiece quality and productive output to new heights.
Features
- ■ Features(1) : Linear motor hoist
- "High quality processing by using coreless linear system"
- High quality processing is possible because cogging (a fine pulsating phenomenon) does not occur during elevation / lowering motions.
- "No change-over is needed by digital operation."
- Drastic reduction of man-hour is possible by digital data input from the control panel.
- It is possible to process a large number of workpieces continuously because the stroke adjustment and change of elevation / lowering speed can be done from the program.
- "High-efficiency processing by high -reciprocating elevation / lowering."
-
Linear motor hoist
- ■ Features(2) : Front relief and side relief motor drive specifications
- "Angle adjustment with handle and button operation"
- No need to use conventional ratchet wrench or special tools to adjust the angle.
- "Angle setting in digital display"
- The digital display on the control panel makes it easy to perform fine adjustment of the setting angle and realizes high reproducibility.
- ■ Features(3) : Smart loupe (PAT.P), Built-in camera (PAT.P)
- "Measurement system with built-in CCD camera in optical loupe and projector"
- The maximum magnification is x1000.
- Displays the images shot by CCD camera on the operation panel monitor.
- With the chart-less measurement function, it is possible to evaluate the difference by synchronizing the geometry data and the image.
-
Smart loupe
- ■ Features(4) : Seamless grinding function
- "Seamless high quality processing"
- Seamless one-path processing is possible with automatic angle change.
- No need to change the grinding wheel.
- "Drastic reduction of man-hour is realized"
- No manual operation of the grinding wheel table is necessary.
- A program to avoid interference can be created by using special software.
- The processing time and program creation time are reduced.
-
Seamless grinding function
- ■ Features(5) : On-machine CAM
- "Consolidates software, communication, and machine status information features into a single device."
- On-board CAM enables easy programming in front of the machine.
- The network enables information sharing between machines and PCs.
- Integrates 15 inch touch panel NC.
- ■ Features(6) : Pneumatic static pressure spindle
- "High-quality processing with new flange and air spindle"
- This special flange focuses on the weight reduction and the center of gravity balance.
- The surface roughness obtained immediately after dressing is improved.
-
Pneumatic static pressure spindle
Specifications
|
Model |
GLS-150GL UP |
||
|
Table |
Working surface (L x W) (mm) |
400 x 250 |
|
|
Travel (mm) |
Traverse feed (Z-axis) |
300 |
|
|
Cross feed (V-axis) |
150 |
||
|
Vertical feed |
125 |
||
|
Jog feed speed (mm/min) |
0, 500, 1000, 2000 (Switching type) |
||
|
Minimum input increment (mm) |
0.0001 |
||
|
Reciprocation |
Reciprocating slide stroke (mm) |
5 - 162 |
|
|
Reciprocation speed (min-1) |
0 - 400*1 |
||
|
Wheel head |
Travel (mm) |
Traverse feed (X-axis) |
200 |
|
Cross feed (Y-axis) |
150 |
||
|
Relief angle (°) |
Radial direction of wheel |
-2 - +20 (Motor drive) |
|
|
Axial direction of wheel |
±15 (Motor drive) |
||
|
Swivel slide swiveling angle (°) |
±15 (NC) |
||
|
Projector |
Screen size (W x H) (mm) |
540 x 420 |
|
|
Magnification (Switching type) |
20x, 50x |
||
|
Magnification Accuracy (%) |
below 0.03 (φ600 range) |
||
|
LED illumination |
Lower part (transmission) |
24V/100W |
|
|
Upper part (reflection) |
24V/100W |
||
|
Spindle |
Wheel size |
φ65 - 100 x 4 - 6 x φ22.23 |
|
|
Wheel spindle speed (min-1) |
2000～20000 (Pneumatic static pressure spindle) |
||
|
Motors |
Main spindle (kW-P) |
1.8-4 |
|
|
Wheel head (kW) |
X/Y-axis |
1 |
|
|
C-axis*2 |
0.5 |
||
|
Table Z/V-axis (kW) |
1 |
||
|
Table up and down (kW) |
0.04 |
||
|
Machine dimensions*3 |
Dry type specs |
1838 x 2275(1925) x 2135 |
|
|
Wet type specs |
1970 x 2275(1925) x 2135 |
||
|
Mass of machine (kg) |
4500 |
||
*1 There is a limitation depending on vertical travel distance.
*2 Optional.
*3 For depth of machine, ( ) is the depth without projector hood.
Specifications, appearance and equipment are subject to change without notice by reason of improvement.
This products is for Japan domestic market.
Contact Us
Contact for repair/recovery of AMADA MACHINERY products and our corporate activities.
Contact Us