AMADA PRESS SYSTEM
Spring Machines
NEW
WH-2A (Dual-point, ø0.03 ~ ø0.2 mm)
13-Axis CNC Dual-Point Coiling Machine for Ultra-Fine Wire
Achieve high-speed and precision processing, with reduced setup time for ultra-fine wire coils.
Fine adjustments are easy with various adjustment mechanisms using servo motors.
The wire cutting method switching mechanism allows you to easily change between straight and rotary cut depending on the situation.
Features
- 1. Improving the quality of ultra-small coiling
-
- The WH-2A supports various shapes with the standard features of 13-axis control: feed, cut, wedge-pitch, push-pitch, point 2-axis, auxiliary point 2-axis, Initial tension 2-axis, feed pressure 2-axis, and arbor front/back.
- With the adoption of a dual feed roller, the feed pressure load applied to the wire is reduced.
- The advanced adjustment mechanism allows smooth fine adjustment of the vertical/horizontal and right/left positions of the arbor.
- The rotary, straight cuts, and wedge-pitch can be switched by simply moving the eccentric pin.
- You can switch programming between right and left-hand coiling without replacing the heavy slide.
- 2. Achieving required quality for guide wires
- The dual-point coiling unit's 4 axes and 2 initial tension axes allow precise control of the outer diameter and initial tension, making it suitable for guide wire forming that requires precision. Peripheral equipment necessary for guide wire forming is also available as an option.
- 3. Space saving for installation
-
- Even though it is equipped with 13-axis, the WH-2A has a machine size equivalent to the SF-1A 5-axis CNC single-point coiling machine for ultra-fine wire.
- The optional compact automatic wire stand MK-1 can be mounted on the rear of the machine, contributing to space savings.
- 4. Support for IOT
- The operating status of machine can be monitored through mobile phones or computers, and regular maintenance with preventive maintenance functions can contribute to improved production efficiency.
- 5. Improved operability with the MNO2 (MEC New Operation 2) programming software
-
- The MEC original spring program MNO2 easily organizes important statistics about the machine, including program flow, operating status of each axis, inputs/outputs, jump, etc., as with our other spring machines.
- Enables the taper tilt to be managed with a value from 0 to 100. Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.
- 6. Measurement screen
- Equipped with camera sensor ZN-1 as standard, the free length and outer diameter of the coil can be instantly measured and separated.
Specifications
| Machine name | WH-2A |
|---|---|
| Wire diameter | ø0.03 ~ ø0.2 mm |
| Outer coil diameter | ø8 mm |
| Index | D/d 3.5 or more |
| Feed axis* | 0.0001 mm |
| Cut axis* | 0.001° |
| Wedge-pitch axis* | 0.001° |
| Push-pitch axis* | 0.001° |
| Point axis* x2 | 0.0001 mm |
| Auxiliary point axis* x2 | 0.0001 mm |
| Arbor front/back* | 0.0001 mm |
| Feed pressure axis* x2 | 0.0001 mm |
| Initial tension axis* x2 | 0.001° |
| Solenoid valves | 4 pcs (Max 8 pcs) |
| Max air pressure | 0.5 MPa |
| Power source | 3-phase, AC 200V, 15A |
| Net weight | 410 kg |
| Control device | Windows |
| Software | MNO2 |
| Display | 15.6” Full HD touch screen |
| External memory | USB Thumb drive |
| Temperature | 5 ~ 40°C |
*Resolution: Program input unit, which does not represent accuracy.
These specifications, machinery, equipment, and appearance are subject to change without notice for reason of improvement.
Please contact us for non-Japanese specifications.
Contact Us
Contact for repair/recovery of AMADA PRESS SYSTEM products and our corporate activities.
Contact Us