LCC 92HT (w: 70 ~ 250 mm, t: 1.2 ~ 6.0 mm)
The LCC 92HT is an NC Straightener feeder that provides everything that users at stamping sites could need.
The stock size is limited to 250 mm or less, enabling costs to be reduced to a dramatic extent that has never been seen before.
Take a look at this unprecedented cost performance.
Features
- ■ Features(1) : TP-CCS Controller
-
A wide variety of information needed for planning, operation, maintenance, etc, is uniformly controlled under the base mode of “Settings, Planning, Operaion, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.
- ■ Features(2) : Large straightening roll adjustment wheels
-
Large straightening roll adjustment hand wheels have been adopted. Symbols are used for the indicators, improving repeatability and permitting easy numerical setting.
- ■ Features(3) : Space-saving design
-
This design requires approximately 15% less installation space for the straightener (compared to previous Oriimec models). The efficient use of space enabled by this downsizing allows safer and more efficient work.
- ■ Features(4) : Includes high output AC servo motor
-
The straightener/feeder, the heart of the unit, includes a 4.4 kW AC servo unit with a high output usually seen only in larger models.
Specifications
| Stock Thickness | mm | 1.2～6.0 |
|---|---|---|
| Stock Width | mm | 70～250 |
| MAX.Coil Mass | kg | 2,500 |
| MAX.Coil O.D. | mm | 1,400 |
| Coil I.D. | mm | 508 |
| Feed Length | mm | ～500※ |
| MAX.Line Speed | m／min | 22 |
| Work Roll Number | ― | upper３/lower２ |
| Main Motor | kW | AC4.4 |
| Mandrel Expansion | ― | pneumatic |
| Reel Motor | kW | 2.2 |
| Power | V | 200／220 |
| Operating Air | MPa | 0.49 |
※In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option） must be provided.
Straightening Performance
| Stock Thickness（mm） | ||
|---|---|---|
| 1.2～5.0 | 6.0 | |
| Stock Width（mm） | 250 | 200 |
※The above figures are for the material having yield strength of 245N/mm2.
Contact Us
Contact for repair/recovery of AMADA PRESS SYSTEM products and our corporate activities.
Contact Us