GLS-80PL
Optical Profile Grinder
Features
- ■ Features(1) : High speed reciprocation type, high accuracy wheel, elevation table
-
- The built-in high accuracy, high resolution optical scale delivers ultra precision feed. 3D design adds high rigidity and stable balance structure to address high speed reciprocation of 80 mm wheel head stroke (maximum), at 600 min-1 (limited stroke).
- ■ Features(2) : High accuracy, high speed spindle (TC-20)
-
- The installed high speed spindle demonstrates high speed, high accuracy, low thermal expansion and enhances surface finish.
- ■ Features(3) : Center-of-gravity bed design
-
- Our new bed design optimizes the layout of jack bolts and ribs and eliminates deflection in the center area and increases static accuracy.
- ■ Features(4) : Advantages of LED specifications
- Reduces “operating cost” significantly
- LED life is 30000 hours. Saves cost of lamp replacements.
- Electrical consumption is lower thanks to LED technology.
- Perception type illumination ON/OFF function is standard feature.
- Low environmental load, reduction of CO2 emission by approx. 600 kg/year.
- “Usability” is vastly improved
- Displacement magnitude of the projector is substantially reduced by 50% compared with conventional machines.
- Provides confidence and stability for processing accurate, high quality grinding.
- Minimizes work stress of operator.
- Projector image shows fine details clearly
- Edge is clear and error detection is easier to see.
- Highly rated by many experienced people in monitoring tests.
- Processing accuracy and quality are improved.
- “Productivity” is increased
- Downtime due to lamp breakage is reduced.
- Annoying lamp replacement work is minimized.
- “Retrofit service” for your existing machines
- Covered machines：GLS-80P, GLS-150G, GLS-5P, GLS-5T
-
LED spec. (image)
Halogen spec. (image)
Specifications
|
Model |
GLS-80PL |
||
|
Table |
Working surface (L x W) (mm) |
400 x 250 |
|
|
Travel (mm) |
Traverse feed (Z-axis) |
300 |
|
|
Cross feed (V-axis) |
150 |
||
|
Vertical feed |
125 |
||
|
Jog feed speed (mm/min) |
0, 500, 1000, 2000 (Switching type) |
||
|
Minimum input increment (mm) |
0.0001 |
||
|
Reciprocation |
Reciprocating slide stroke (mm) |
0 - 80 |
|
|
Reciprocation speed (min-1) |
30 - 600 (*1) |
||
|
Wheel head |
Travel (mm) |
Traverse feed (X-axis) |
200 |
|
Cross feed (Y-axis) |
150 |
||
|
Relief angle (°) |
Radial direction of wheel |
-1 - +2 |
|
|
Axial direction of wheel |
±3 |
||
|
Swivel slide swiveling angle (°) |
±15 (Hydraulic clamp) |
||
|
Projector |
Screen size (W x H) (mm) |
540 x 420 |
|
|
Magnification (switching type) |
20 x, 50 x |
||
|
Magnification accuracy (%) |
below 0.03 (φ600 range) |
||
|
LED illumination |
Lower part (transmission) |
24V/100W |
|
|
Upper part (reflection) |
24V/100W |
||
|
Spindle |
Wheel size |
High-speed type specs |
Middle diameter: 65 - 100 x 4 - 6 x 22.23 |
|
Low-speed type specs |
- |
||
|
Wheel spindle speed (min-1) |
High-speed type specs |
2000 - 20000 (TC-20) |
|
|
Low-speed type specs |
- |
||
|
Motors |
Main spindle (kW-P) |
1.5-4 |
|
|
Reciprocation (kW) |
3 |
||
|
Wheel head |
X/Y-axis (kW) |
1 |
|
|
C-axis (kW) (*2) |
0.5 (*2) |
||
|
Table Z/V-axis (kW) |
1 |
||
|
Table up and down (kW) |
0.04 |
||
|
Machine dimensions |
Dry type specs (*3) |
1785 x 2275(1925) x 2135 |
|
|
Wet type specs (*3) |
- |
||
|
Mass of machine (kg) |
4500 |
||
*1 There is a limitation depending on vertical travel distance.
*2 Optional
*3 For depth of machine, ( ) is the depth without projector hood.
Options
- Electromagnetic Chuck for Carbide Material SM-C1810
- Electromagnetic Chuck for Carbide Material SM-C1580
- R Dresser Over Machine MRD-180
- Compact Cylinder Grinding Equipment CGE-100
Specifications, appearance and equipment are subject to change without notice by reason of improvement.
This products is for Japan domestic market.
Contact Us
Contact for repair/recovery of AMADA MACHINERY products and our corporate activities.
Contact Us