AMADA MACHINERY
Structural Steel Machines
Drilling Machines
3 Drills
3DH-1000III
High Accuracy 3-Axis CNC Fully Automatic Drilling Machine for H-Shape Structural Steel
Features
- ■ Features(1) : High Speed, High Accuracy Automatic Drilling
- Double Gripper Feeder Unit
- A double gripper index system is employed for feed and retract movements. From the start of processing to the end, one of the grippers is always clamping the material, thereby ensuring positioning accuracy of +/- 0.5 mm over a 13 m feed.
- No need for manual positioning of the work. High accuracy positioning is possible with the Auto-Start function which automatically detects the edge of the material.
- The drill can also be used to mark locations on the part for further processing. With a simple numeric input, marks can be made for: cuts, diagonal cuts and sleeve holes for welding.
- By supporting the webbing of thin wall material with two supports, stable and accurate drilling is achieved.
Double Gripper Feeder Unit
and Web Support Unit
Automatic Work Edge Surface
Detection
Marking
- ■ Features(2) : Improvement In Working Environment
- Full Enclosure Cover
- The full enclosure contains the flying chips keeping workers safe and the work area clean.
- A Clean Mist coolant system is utilized which is better for the environment and reduces the amount of post process work.
Clean Mist Nozzle
Movies
Specifications
| Model | 3DH-1000III | ||
| Processing capacity | H-shape steel (mm) | 148 x 75 - 1000 x 500 (Flange plate thickness: 5 - 55) | |
| Channel (mm) | 150 x 75 - 380 x 100 | ||
| Hole diameter (mm) | V axis | φ14.0 - φ40.0 | |
| R/L axis | φ14.0 - φ32.0 | ||
| Minimum processing length (mm) | 550Note 1) | ||
| Spindle unit | Number of axes | 3-axis (V, R, and L) | |
| Maximum spindle speed (min-1) | 570 | ||
| Motor | Gripper axis(kW) | 3 (AC servo moter) | |
| V axis (kW) | 0.3 (AC servo moter) | ||
| R/L axis (kW) | 0.6 for both (AC servo moter) | ||
| Spindle (kW) | 3.7 (3 units) | ||
| Hydraulic unit (kW) | 2.2 (1 unit), 1.5 (1 unit) | ||
| Set air pressure (MPa) | 0.5 | ||
| Power requirement (kVA) | 27.0 | ||
| Machine dimensions (W x L x H) (mm) | 3580 x 2899 x 3109 (Main unit only) |
||
| Mass of machine (kg) | 8300 (Main unit only) | ||
Note 1) For material that is 550 mm or larger but less than 1900 mm, short-length material work setting will be required.
Specifications, appearance and equipment are subject to change without notice by reason of improvement.
This products is for Japan domestic market.
Contact Us
Contact for repair/recovery of AMADA MACHINERY products and our corporate activities.
Contact Us