AMADA MACHINERY
Band Saw Machines
Semi-Automatic General-Purpose Band Saw Machines
H-250H
General-Purpose Band Saw Machine
Horizontal semi-automatic metal cutting band saw machine
Features
- ■ Features(1) : PF valve
- The cutting process can be optimized just by setting up the PF valve to the target “material, shape and size”.
- ■ Features(2) : Cutting depth setting unit
- The blade descends horizontally. Tooling and dovetail grooving can be easily handled by adjusting a cutting end height.
- ■ Features(3) : Lever type insert clamp
- A foolproof lever type insert clamp is installed to the guide bracket.
- ■ Features(4) : Motor-driven Coolant pump
- A motor-driven centrifugal pump was introduced in this model, rather than a conventional gear pump. Cutting fluid can be used and cleaned regardless of whether the main motor is ON or OFF.
- ■ Features(5) : Vise mechanism
- Vise jaws are located on both the front and the rear sides of the blade in a well-balanced manner in order to properly feed and hold materials. This vise mechanism is capable of properly clamping small materials.
Specifications
| Model | H-250H | |
| Cutting capacity (mm) | Round (Dia) | φ250 |
| Rectangle (W x H) | 300 x 250 | |
| Blade size (W x T x L) (mm) | 27 x 0.9 x 3505 | |
| Blade speed (m/min) | 22, 33, 45, 57, 67 (50Hz) | |
| 27, 40, 54, 68, 80 (60Hz) | ||
| Motors (kW) | Saw blade | 2.2 |
| Hydraulic pump | 0.75 | |
| Coolant pump | 0.12 | |
| Wire brush | - | |
| Power requirement (kVA) | 5 | |
| Stroke length (mm) | - | |
| Tank capacity (L) | Hydraulic | 20 |
| Coolant | 38 | |
| Table height (mm) | 700 | |
| Allowable load (Mass of work) (kg) | 1500 | |
| Machine dimensions (W x L x H) (mm) | 1742 x 1156 x 1540 | |
| Mass of machine (kg) | 1000 | |
Options
- Roller table
Specifications, appearance and equipment are subject to change without notice by reason of improvement.
This products is for Japan domestic market.
Contact Us
Contact for repair/recovery of AMADA MACHINERY products and our corporate activities.
Contact Us